|
电压要求: |
供应电压: |
24VDC ± 5V |
|
|
电流: |
Max.1A
|
|
最大负荷: |
|
3000 steps |
|
活塞驱动: |
原理: |
Quad encoder for loss of steps, detection of loss steps with
error message
|
|
|
l额定行程: |
30mm |
|
活塞速度: |
|
1.2 sec. - 20 min./full stroke (speed ranges vary depending
on syringe size and tubing) |
|
|
|
进样管: |
类型： |
XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml |
 |
精度: |
 0.05% CV
within run at full stroke (for 1000µl syringe and above) |
|
错误率: |
<1.0% at full stroke |
|
流动接触: |
Glass, PCTFE and Teflon |
|
|
|
阀/阀驱动: |
阀的选项: |
120° 3-port distribution |
 |
运行时间: |
250ms between adjacent ports |
|
驱动: |
Stepper motor with optical sensor for position detection
|
|
Positions: |
Input, output, bypass |
|
材料: |
Plug: virgin teflon
Body: PCTFE |
|
适合接口: |
1/4-28"-UNF screw fitting for syringe |
|
阀连接引流管 |
|
|
|
|
|
|
|
螺丝纹接头 |
|
|
 |
螺纹 |
管径 |
货号 |
|
M6 |
3.2mm(1/18") |
4130005 |
|
1/4x28" |
3.2mm(1/18") |
4130020 |
|
M6 |
1.6mm(1/16") |
4130016 |
|
1/4x28" |
1.6mm(1/16") |
4130019 |
|
M6 |
2.7mm |
4130004 |
|
1/4x28" |
2.7mm |
4130025 |
|
|
Female luer Caps,10 per Pack |
2702206 |
|
螺丝纹接头垫片 |
|
|
|
 |
为管径 |
为货号 |
|
3.2mm |
4132032 |
|
1.6mm |
4132016 |
|
2.7mm |
4132031 |
|
通讯接口: |
类型: |
RS 232, RS 485 or CAN bus |
|
|
通讯速率: |
9.600 or 38.400, 100K or 125K (CAN bus)
|
|
|
格式: |
Data bits: 8 parity: none
Stop bits: 1 half duplex |
|
|
地址拨码: |
up to 15 XP/AL devices can be addressed individually |
|
|
信息: |
Data terminal and OEM protocol |
|
Firmware: |
|
Programmable ramps, cutoffs, backlash compensation, plunger
speeds, delays and loops
Arbitrarily selectable plunger speed
Clearance compensation
Absolute and relative positions
Diagnostics
Flash-PROM |
|
环境温度: |
|
温度: 17-37°C
湿度: 10-85%
Non condensing RH at: 5°C-40°C |
|
尺寸: |
高度: |
127mm (+)1mm
|
|
|
宽度: |
45mm (+)1mm
|
|
|
深度: |
113mm |
|
|
重量: |
1.2kg |
|
以上泵用压边工具 |
 |
以上泵的引流管需要接压过边的管子，如果压边可以查看左边的压边工具1.6mm，3.2mm 管都。 |
310100103448
